Neomax® C102 Plus

DESCRIPTION
Neomax® C102 Plus is an one-component waterproofing compound which is made up of multifunctional polymer. It can be mixed with cement to form a liquid mixture with incredible water proofing and economical properties and easy to use.

USED
Neomax® C102 Plus is used to make a perfect waterproofing coating layer for:
Exposed walls;
Exposed roofs;
Terrace, yards;
Balconies, loggia;
Green balconies, flower-beds;
Restrooms;
Basement walls;
Reinforced concrete retaining wall;
Girder bridge, abument bridge;
Surface of exposed concrete.

ADVANTAGES
Easy to work with the support of brushes, rollers and specialized sprayers;
Excellent water proofing properties;
Finishing surface is solid, firm, bright and fine;
Weatherable;
Anti-moss and mold permanently;
Excellent adhesion to grout and cement;
Non-toxic.

PRODUCT FEATURES
State: Liquid;
Color: Milky white.

PACKING:
05 kg/bucket;
20 kg/bucket;
Or per customer's specific request.

STORAGE CONDITIONS
Store the product in a dry, cool and well ventilated area;
Do not expose to direct light.

SHELF LIFE: 12 months since the production date.

CONSUMPTION:
For exposed wall: 0.2 - 0.25 kg/m2/layer;
For floor: 0.5 - 0.75 kg/m2/layer;
At least 2 - 3 layers are required.

WORKING TEMPERATURE: 10°C - 35°C.

PRODUCTION STANDARD: TCCS 11:2018/NEOMAX

SURFACE PREPARATION
All working surfaces must be completely clean and free from dust, grease and impurities;
For exposed walls: Surface is completely dry;
For roofs, floors: Surface needs to be saturated but no more excessive water trapped.

MIXING METHOD
For exposed walls:
Water : Cement : Neomax® C102 Plus = 0.5 : 0.5 : 1 (by weight).
For roofs, floors:
Water : Cement : Neomax® C102 Plus = 0.25 : 0.75 : 1 (by weight).
Thoroughly stir Neomax® C102 Plus before mixing;
Use an electric mixer at speeds of 400-600 rpm to mix the two components;
Use an electric mixer at speeds of 400-600 rounds/minute following 2 steps:
- Step 1: Mixing cement with water: Mixing time is from 2 minutes until we get a homogeneous mixture;
- Step 2: Mixing Neomax® C102 Plus with the ready output of Step 1: Mixing time is from 3 minutes until we get a homogeneous mixture.

WORKING
Applying the product right after it is mixed;
Applying Neomax® C102 Plus onto the clean surface with a roller, brush or specialized sprayer;
Consumption (base on weight of Neomax® C102 Plus before mixing with water and cement):
- For exposed wall: 0.2 - 0.25 /kg/m2/layer;
- For roofs and floors: 0.5- 0.75 /kg/m2/layer;
At least 2 - 3 layers are required. The working interval between two layers is about 4 - 6 hours and the application directions of two layers are perpendicular;
Working time: 60 minutes at the temperature of 25 ± 2°C.

NOTE
Do not apply Neomax® C102 Plus when it is rainy or wet to ensure the best effect of water proofing as well as aesthetics of the finished surface.

Technical Data Sheet

Material Safety Data Sheet

Similar product

popup

Số lượng:

Tổng tiền:

Hotline
0938 065 888