Neomax® C102

DESCRIPTION
Neomax® C102 is a 2-component waterproofing compound comprising of liquid polymer and cement. The product includes a mixture in powder form (special cement and additives) with a synthetic polymer resin component in liquid form.

USED
Neomax® C102 is used to make a waterproofing coating layer for:
Exposed roofs, terrace, yard;
Balconies, loggia;
Green balconies, flower-beds;
Restrooms;
Basement floors and walls, pits of lifts;
Swimming pools, water tank for fire extinguishment;
Sewage tanks;
Traffic, irrigation and hydropower projects;
Aquarium for ornamental creatures;
Other underground sections.

ADVANTAGES
Easy to work with the support of brushes, rollers and specialized sprayers;
Possible to apply on damp surfaces;
Excellent adhesion to different surfaces;
Able to fill small cracks;
Great durability to different weather conditions;
Able to be used for outside works;
Non-toxic and friendly to water sources even with direct contact;
Possible to be applied for drinking water tanks.

PRODUCT FEATURES
Component A:
State: Powder;
Color: Grey.

Component B:
State: Liquid;
Color: Milky white.

PACKING:
Component A: 25 kg;
Component B: 10 kg.

STORAGE CONDITIONS
Store the product in a dry, cool and well ventilated area;
Do not expose it to direct light

SHELF LIFE: 12 months since the production date.

CONSUMPTION:
1.0 - 1.5 kg/m2/layer;
At least 2 layers are required.

WORKING TEMPERATURE: 10°C - 35°C.

PRODUCTION STANDARD: TCCS 10:2018/NEOMAX

Working time: ≤ 30 minutes

Complete curing time: ≥ 4 hours

Tensile adhesion strength after water contact (BS EN 14891:2007): ≥ 1.0 MPa

Tensile adhesion strength after heat ageing (BS EN 14891:2007): ≥ 1.0 MPa

Impermeability to water under pressure at 1.5 bar after 7 days (BS EN 14891:2007): Impermeable

Notes: All above technical properties are tested in the standard experiment conditions with temperature of 25oC and moisture of 50%. All tested samples are at the age of 28 days.

SURFACE PREPARATION
All working surfaces must be completely clean and free from dust, grease and impurities;
The water-absorbing surface needs to be saturated but no more excessive water trapped.

MIXING METHOD
Mixing ratio of A : B = 2.5 : 1 (by weight);
Use an electric mixer at speeds of 400 - 600 rpm to mix the two components;
Pour all component B in the mixing bucket, then slowly adding component A while keeping stirring thoroughly.
Mixing time is from 3 – 5 minutes until we get a homogeneous mixture.

WORKING
Applying the product with a roller, brush or specialized sprayer.
Consumption: 1.0 - 1.5 kg/m2/layer;
At least 2 layers are required. The working interval between two layers is about 2 - 4 hours and the application directions of two layers are perpendicular.
Working time: 30 minutes at the temperature of 25 ± 2°C.

NOTE
No water is allowed to contact with the coatings for 4 hours after construction. For outdoor items, in case it rains, it is necessary to take measures to cover and protect the coating carefully;
Do not add water to the mixture while stirring.

Technical Data Sheet

Material Safety Data Sheet

Similar product

popup

Số lượng:

Tổng tiền:

Hotline
0938 065 888